A new study, recently published by Totaro & Associates examines the U.S. patent landscape of wind turbines to determine which technological trends have emerged so far and what we might be able to infer for the future direction of wind turbine technology.
The study focused on the most prevalent sector of wind turbine technology – utility grade, horizontal axis wind turbines.
The methodology involved searching and aggregating relevant results using technology keyword classification, then analyzing those results to identify the degree of relevancy to the industry for each patent. The study found and analyzed over 1,450 patents just for the US.
I. Today’s Wind Patents: (Mostly) Yesterday’s Solutions
Most of today’s wind patents solve yesterday’s problems. The largest majority of inventions are directed towards blades, electrical systems and generators. These are the components which have required the most quality, efficiency and reliability enhancement in the past 10 years.
However, the study finds that controls and sensors have recently jumped towards the top of the list of patented wind components. This signals a shift in focus towards performance optimization, load mitigation and grid integration in the coming years.
II. Tomorrow’s Wind Patents: Five Trends to Watch
Based on more recent filings as well as an analysis of more forward looking industry competitive intelligence the study was able to determine future technology trends. New technologies, and subsequently the patents, will likely be directed towards five core areas.
Reducing Component Weight and Manufacturing Costs
The first is component weight / cost reduction, and derives from the desire to maintain a tower head mass ratio (mass / annual kWhr) that is comparable to or better than today’s technology.
Additionally, most OEMs equate mass with cost in their competitive cost of energy (COE) benchmarking, and rightly so given the expense of commodities, so many wind turbine manufacturers have introduced “cost-out” programs in the recent years.
Expect these projects to lead to cost cutting innovations for which top tier OEMs will look to capture IP.
Facilitating Component Transport and Assembly
The next area of focus is on component transportation and assembly, which relates back to the mass and cost concepts as well as the physical transportation constraints which exist.
As component sizes grow due to larger turbines being developed, the mass increases correspondingly, but excessive mass may incur excessive transportation cost. The use of advanced modeling tools to optimize the amount of material used and predict failure modes becomes important.
Furthermore, blades with a root diameter or towers with a base diameter beyond ~4.3 meters will face transportation hurdles in a land-based environment. While it is possible to manufacture such structures inside these physical constraints, more material will be required to reinforce them, which is not an optimal solution in a cost competitive industry.
Therefore, segmentation of towers and blades as well as “on site” assembly procedures and tools are likely to become of significant importance. Proactive manufactures have already captured some of the core IP in this area.
Monitoring and Controlling Wind Turbines
The third trend relates to fleet management technology which centers around condition monitoring and control of turbines and wind farms. While the first two future trends were focused on reducing COE from the capital cost side of the equation, this trend is solely based on minimizing recurring O&M cost.
Technologies like condition monitoring systems (CMS), which can determine health of individual turbines in a wind farm as well as their components to the integration of CMS with control systems to enable optimal turbine output while still functioning within a dynamic operational envelope are being investigated and even deployed.
Continuing to operate the turbine in an effort to mitigate unscheduled maintenance as well as planning of scheduled maintenance to maintain as much on-line capacity and up time as possible are important to both OEMs and the owners / operators of wind farms.
Integrating into the Utility Grid
Grid integration is the next trend, and the move towards the “grid friendly” turbine is already underway.
Turbines based on induction generator technology have found it more difficult and costly to achieve ride-through, allow for curtailment or handle a “black start” where the grid is not present.
Technologies around providing ancillary services to the turbine, as well as VAR support to the grid are of particular interest.
The use of permanent magnet synchronous generators enables better efficiency and performance without sacrificing much in the variable speed range, and now with a high degree of interest in direct drive the use of this technology is likely to continue. Optimizing Performance
Lastly, wind turbine and wind farm performance optimizations will continue. This is something we have termed “Max energy output, all the time.”
Controls for both curtailment and “uprating” due to prevailing conditions are being actively investigated by multiple OEMs.
Also, as mentioned before, the integration of CMS with control systems will enable the determination of remaining useful life of components and the ability to operate the turbine to the maximum potential without incurring further damage.
The days of fixed pitch and fixed speed are over.
Article by Phillip Totaro, Pricipal at Totaro & Associates, appearing courtesy Green Patent Blog.
- ppt on green energy technology
- patents in renewable energy industry datamonitor
- ppt on future india
- green power future ppt
- green energy future of india ppt
- Current and Future Trends in Wind Turbine Technology
Utility grade wind turbines have become so technologically advanced that they have improved the cost of energy of wind enough to become more mainstream than ever before and compete with todays conventional energy sources. We have decided to conduct an investigation of the patent landscape to see what technological trends have emerged thus far and
- Energy Market, 2009-2014, June… -
NEW YORK, Dec. 17 /PRNewswire/ — Reportlinker.com announces that a new market research report is available in its catalogue: Future Material Needs for the Global Wind Energy Market, 2009-2014, June 2009 http://www.reportlinker.com/p0169903/Future-Material-Needs-for-the-Global-Wind-Energy-Market-2009-2014-June-2009.html The author believes there is enormous opportunity for suppliers of composite materials in the fabrication of wind blades and other wind
- Loess Hills Wind Energy 2010 April 07
AWEA makes a statement on Nebraska Wind Integration Study 7. April 2010 by admin. FOR IMMEDIATE RELEASE: March 12, 2010 A groundbreaking study has found that Nebraska and the other states in the Southwest Power Pool (SPP) region can reliably obtain 40% of their electricity from wind energy, achieving major carbon emissions reductions and
- Value Chain Analysis – Market Research Reports
Order by Fax Printer FriendlyPDF Brochure Site License
- Wind Power – Arizona Solar Center
Wind Power Introduction Like hydropower, wind power has been used for centuries, to lift water, propel boats, grind grain. It is an attractive and non-polluting source for electricity. It has only been since the mid 1980s, however, that wind power has contributed appreciably to our supply of electricity. The largest generating capacity in the world